The floor plan (right) shows a typical semi-detached or small detached house with attached garage.

The installation uses inertia detectors and hence should be ok with pets.

This installation uses a blank end-station (mounted under the stairs or could be mounted in the garage) and a Remote Keypad in the hall. You could of course just use a simple control panel mounted in the hall.

In this case it has been decided that only the ground floor is to be alarmed and only the main living space and garage.

The magnetic contact at the front door is wired to the entry/exit zone on the control panel.

The magnetic contact at the rear door is wired to zone 3 on the control panel.

The Inertia detectors are all wired to zone 2 on the control panel.

The magnetic contact on the garage is wired to zone 4 on the control panel.

In operation any of the zones can be separately controlled.

Please Note: This site has now moved!! Please Go to the New Sapphire Burglar Alarm Site